EYC215LJ2G57 Tough Tool Combo Kits

18V/5.0Ah Cordless Drill and Impact Driver Kit

Lightweight and compact yet powerful Drill and Driver – ideal for general construction, carpentry, electrical and plumbing work. The Impact Driver is extremely lightweight and compact making it ideal for overhead work, such as bolt/nut fastening and screw fastening.

Features

High Performance Cordless Drill & Driver / Impact Driver Combo Kit

The Panasonic EYC215LJ2G57 18V Dual Voltage, 5.0Ah Li-ion battery Cordless Drill & Driver / Impact Driver Combo Kit combines lightweight bodies with extreme power. Both units feature precision variable speed control/reversible, high power brushless motor, plus LED light for user-friendly operation in dark areas, and an electric brake for added safety.

Extreme Durability

New Brushless Motor

Without brushes and commutator which can reduce the lifetime of the tool, the motor lasts approximately twice compared with brushed motor*.

* Compared with Panasonic conventional brushed motor.

New Ultra Hard Chuck Jaw Tips

We increased durability of every part right down to the new metal chuck which features tungsten carbide jaw tips. These extra hardened inserts are brazed into each jaw to give extra ‘bite strength’ and substantially reduce wear.

New Hybrid Switch

To eliminate heavy friction to internal parts of the switch during use of electric brake, we developed a new semi-electronic switch. This gives smoother operation and double* the life expectancy of the part.

* Compared with Panasonic conventional switches.

Increased Efficiency and Flexibility

The new ‘Speed Control Function’ allows the user to select from three different low rotation speed settings, based on allowable maximum speeds for metal hole saws. It greatly reduces ‘run out’ when using metal hole saws and prevents surface scorching on stainless steel and other materials.

The advanced ‘Smooth Start’ electronics allow easy, precise speed control, enabling the ultimate control when starting drilling or working with small screws in precise applications.

Multiple Modes for all Applications

Hard

Fastening long bit and bolt.

Medium

Fastening for furniture.

Soft

Fastening for plaster board.

Self Drilling Screw Mode

This new function starts at highest speed to cut hole and then transfers to High Mode to cut initial thread. After that, load is reduced so it automatically switches to slower Soft Mode to limit the potential of stripping threads on fastener or material.

Robust Build for Heavy-Duty Use

Battery Capacity in M12 Hightensile Bolt: More than 30,000pcs¹

New brushless motor has approximately 200%² more life cycles. And with a thicker motor shaft (ø5mm) ensures more strength for heavy-duty use.

¹ Panasonic test result by M12 High strength bolt (2sec). ² Compared with Panasonic conventional brushed motor.

Durable Switch

Hybrid switch unit uses rigid metal parts in the trigger, giving you 200% more durability³.

³ Compared with our previous mechanical switch.

Robust Anvil

Redesign and improvement of anvil materials has increased durability of impact parts giving longer service life and increased overall performance.

Increased Housing Durability

To increase housing durability, metal plates have been added where the battery locks into the tool. This helps prevent wear and damage caused by abrasion and vibration during heavy use.

Advanced Ergonomics

The all new shorter brushless motor helped designers to achieve our most compact high power impact driver with optimum centre-balanced ergonomics for more comfortable working, even in narrow spaces.

Tough Tools for Tough Conditions

Many things can happen at a job site such as unexpected incidents, water contact, or exposure to dust; which can cause a tool to malfunction. By incorporating the Tough Tool IP technology, it reassures that Panasonic cordless tools perform at its best in the most difficult situations.

Dust and Water
Resistant Level IP56

The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards.

LEVEL 5 - Dust Protected
LEVEL 6 - Protected Against Powerful Water Jets

Performance Protection

Switch

An additional rubber cap seals the switch and protects it against dust and water.

Electronics

The electronic circuits of control panel and battery pack are covered by an Urethan layer for maximum dust and water protection.

Battery

The battery cells are designed to avoid intrusion of moisture.

Dual Voltage for Better Versatility

Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.

18V 3.0Ah

With the 18V 3.0Ah battery, the application speed and working capacity goes up.

14.4V 4.2Ah

With the 14.4V 4.2Ah battery, it’s easier to use with light weight and compactness.

18V 5.0Ah

With the 18V 5.0Ah battery, the application speed and working capacity goes up with increased power.

Powerful and Longer Lasting

Panasonic’s new generation 18V 5.0Ah Li-ion battery cell offers more durability during high workload conditions due to its reduction in internal resistance.

Durable New Design

Over-discharged
prevention sensor
Prevents over-discharge to avoid lasting cell damage or recharge problems.

Battery overheat
protection sensor
Cuts off power to the motor before the battery temperature rises.

Individual monitoring of
battery cell voltage
Each cell monitored by sensor to ensure optimal discharge control.

Battery sensor
Flashing lamps indicates overheating battery. Battery is automatically reactivated when temperature drops.

Heat resistance layer technology
In cases where seperator is damaged and abnormal heat is created, HRL acts to contain this heat, just like a Fire wall.

NNP technology
Panasonic’s own developed Nickel oxide material provides higher capacity and higher reliability.